Wolo Big Bad Max Air Horn
$59.27
Free Shipping- Fire off a loud blast that lets everyone know exactly where you are with the Wolo Big Bad Max Air Horn
- One-piece design, with no hoses required
- Enhanced sound chamber produces sound three times louder than a standard factory horn
- Maintenance-free compressor made of heavy-duty ABS plastic with Black Stealth finish
- Fits 12 V vehicles, includes 30 amp relay
- Never has to be cleaned, corrosion-resistant
- 123.5 dB, 320 Hz
- 3-1/2" x 5-3/4" x 4-5/8"
- Simple installation via single bolt (included)
- Backed by a 1-Year Warranty
A quick blast of a loud horn can often be the difference between making it safely through a hairy situation and complete catastrophe. Make sure other drivers can hear you out there with the Wolo Big Bad Max Air Horn.
This one-piece air horn offers up over 123 decibels of air-puncturing power. That's nearly 3 times as loud as a standard factory horn. No doubt about it, the Wolo Big Bad Max Air Horn will get you noticed in a big way. An enhanced sound chamber produces that lovely blast from a horn that fits 12 V vehicles with no additional hoses required. A simple installation puts this durable horn, which never has to be cleaned or maintained thanks to a heavy-duty ABS plastic compressor and Black Stealth finish, at your disposal in practically any vehicle. Pick one up, switch the wiring, mount it, and get ready to make some noise!
When you need to blow your air horn, make sure that it gets heard. The Wolo Big Bad Max Air Horn gives your vehicle the loud and immediate signal burst you need. Backed by a 1-Year Warranty.
Wolo Big Bad Max Air Horn Customer Reviews
Overall Rating:
4.4 of 5Average Install Time: 30-60 minutes
Showing 10 of 16 reviews. See All Reviews.
I installed 2 of these in my tundra and they sound great, definitely louder than stock and slightly louder than the train horn I had in the truck that stopped working. However the wiring directions are lacking. For my particular application I had to run both of the stock horn wires to the positive terminal on the horn and a separate ground wire on the negative terminal. The passenger side stock horn only had 1 wire which I also ran to the positive on the 2nd horn and another ground and it worked the same. For me it was easier to run 2 separate grounds for each horn but depending on your vehicle you could also run both negative wires to a single clean ground. Be sure to either use heat shrink connectors and or wire looms and electrical grease on your connections to keep the moisture out. You will also have to put in a higher amp fuse in the stock horn fuse slot. For the price these horns are exceptional.
Install Time: 30-60 minutes
Product looks great in its packaging. Was easy to install. Loudness is not as loud as the dual horns factory installed on our Navigator. But it is a different (more guttural) sound so I left it in.
Install Time: 30-60 minutes
Now I get respect! Going under a via-duct, the horn sounds like a firetruck! Thank you for all of your help in suggesting this horn for my '93 Ford Ranger!
Install Time: 1-2 hours
Not as loud as advertised. I am very disappointed. While it installed easy, not worth my efforts and the cost of the horn.
Install Time: Under 30 minutes
Had to cut the stock connector. In my truck there was very little slack wire. The bolt that came with the horn was too big for the mounting piece so I needed to modify. Blew my 10 amp fuse, threw In a 20. All is good now.
Install Time: 30-60 minutes
Put this on my 2017 winnebago navion motor home. Took a little longer to install because I was limited on space. Works and sounds great!
Install Time: 30-60 minutes
Receive product ON time. Longest part of install was finding a spot to mount, I ended up drilling a hole in radiator support and mounting on right side of hood latch. I spliced in stock horn wires with some pinch connectors so both horns work together was done. Thought I might need a bigger fuse but the stock 20a is working fine, with both horns, can't wait to use it.
Install Time: 30-60 minutes
Great out of the package. If you use with factory horn switch fuses to 35 amp. All you need is wire splice 2 ways and your good to go.
Install Time: 30-60 minutes
This item is not "Plug and Play" on my 2005 Dodge Ram 1500 pickup. The horn and connections are two different types of connectors and there was no universal wiring harness provided or offered. I did not install the device and I will be sending this item back.
Install Time: 1-2 hours
Quick and easy to replace on a GMC 4500 box truck.
Install Time: 30-60 minutes
Showing 10 of 16 reviews. See All Reviews.
