| Home > Exhaust > Corsa > Performance Exhaust Systems |
- Priced from: $556.87
- Free Shipping
- Corsa Exhausts deliver extreme horsepower gains thanks to muffler chambers with no restrictions or power-robbing packing material
- Cancels unwanted “droning” interior resonance at cruising speeds, thanks to Corsa's patented aerospace-grade Power-Pulse RSC™ muffler technology
- Specialized channels in a Corsa Exhaust muffler use reflective technology to cancel unwanted resonance sound while letting the sweet tone of V8 power flow through
- Straight-through, 2.5" nonrestrictive design specifically tuned for the vehicle.
- Flow bench-tested 61% gain in exhaust flow vs. stock muffler.
- All 304 stainless steel construction, crafted with pride and precision in the USA.
- Patented* Reflective Sound Cancellation™ (RSC™) Technology.
- No welding required; Bolt-on installation.
- Includes hardware and illustrated installation guide.
- 50-state emissions legal.
- Complies with 95 dB requirement when tested in accordancewith SAE test procedure, J1169 (May 1998).
- Limited LIFETIME WARRANTY for as long as you own your vehicle.
- Made in the U.S.A.
Note: Corsa Exhaust Systems are available in two system styles for select vehicles: Sport or Touring. CORSA's RSC™ Sport Systems are best described as producing a bolder sound most evident between 3000-5000 RPM WOT. CORSA's RSC™ Touring Systems respond with a more reserved, deep V-8 sound, yet are throaty under acceleration.
Corsa Exhausts are founded on a combination no other exhaust can deliver: total resonance cancellation, exhilarating horsepower gains, true performance sound and improved fuel economy. The
true feature that makes a Corsa Exhaust stand out is the patented
Power-Pulse RSC™ technology that eliminates annoying
interior resonance. Corsa Exhaust systems produce awesome
sound at full throttle, and whisper-quiet cruising, no matter
what you drive! Corsa Exhaust systems give you Power, sound
and better gas mileage without the resonance. Only a Corsa
Exhaust can deliver a performance package such as this. All
pipes are mandrel bent from 100% stainless steel and custom
designed for an easy fit. |
| Customer Reviews -NEW! |
Alex T. who drives a TOYOTA TUNDRA Posted on 9/3/2008 11:00:28 PM Timothy L. who drives a CHEVROLET CORVETTE Posted on 8/13/2008 9:22:02 PM Robert Rose who drives a CHEVROLET TRAILBLAZER Posted on 7/1/2008 10:40:37 AM
|
| Related Products |
| Corsa XO Pipes & Downpipes |
|
CORSA straight-through design coupled with RSC™ noise cancellation technology allows us to tune out the undesirable low frequencies that cause droning, while reducing back pressure. A reduction in back pressure allows the engine to produce more horsepower and torque. CORSA uses its patented Reflective Sound Cancellation™ (RSC™) technology to eliminate low frequency resonance while minimizing backpressure. Sound waves are reflected within the muffler case, producing a cancellation wave effect, with no flow restriction and without electronic devices.
- Priced from: $181.87
- Free Shipping
|
|
| borla exhaust systems |
|
Borla Performance Industries is the leader in the design and manufacture of stainless steel performance exhaust. Borla began two decades ago as a manufacturer of exhaust systems for such "concours classics" as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today's performance vehicles for the street, off-road, and racing.
|
|
 |
| about Corsa |
| Corsa - www.corsaperf.com |
CORSA
Performance is an engineering and manufacturing company based in
Berea, Ohio, that specializes in high performance stainless steel
exhaust systems for the marine and automotive aftermarket. CORSA's
founder and President, Jim Browning, spent more than 17 years working
for high performance automotive industry giant Mr. Gasket in various
capacities, including Vice President of Research and Development,
before starting CORSA Performance in 1989.
Since that time CORSA has become a leader in performance marine
exhaust systems supplying more than 60 OEM boat manufacturers and
more than 1,000 boat dealers worldwide. CORSA manufacturers a wide
range of products, including diverter valves, muffler systems, exhaust
tips, and silencers, that are designed and tested to meet noise
restrictions in all states.
CORSA has incorporated the use of hydroforming, or bulge forming,
equipment in its manufacturing process. Bulge forming is a revolutionary,
leading edge manufacturing process that uses extreme fluid pressure
to expand metal into shapes that otherwise would have been unobtainable
using conventional manufacturing methods.
In fact, CORSA is the only manufacturer in the marine industry and
automotive aftermarket to have in-house hydroforming capabilities.
A good example of what can be accomplished with hydroforming is
the new generation C5 Corvette steel frame rails. Hyrdoforming provides
increased strength, greater part dimensional precision, and reduces
over-all vehicle weight. Hydroforming also affords manufacturing
cost savings by reducing tool and equipment requirements, less blanking,
trimming, flanging, fixtures, and complicated welding and piercing
operations - and results in less scrap and provides parts consolidation
benefits. |
|
|
