| Home
> Exhaust Systems > Diesel Performance Exhaust Systems |
| 
|
|
| |
|
| Bassani Diesel Exhaust System |
| Bassani Xhaust Aft-Cat Exhaust Systems |
|
Bassani Xhaust is recognized for unsurpassed quality and fit, starting with superior materials, precision mandrel bends, and precise welding by expert craftsmen. They use gasket less ball and socket connections to simplify installation and their systems are shipped complete with premium high-grade mounting hardware.
- Custom made for your specific make and model
- Significant gains in Power, Sound and Performance
- Premium Cats are used and all factory emission connections are retained on pipes
- Complete with superior quality mounting hardware and detailed installation instructions
- Made with pride in the U.S.A.
- Priced from: $183.87-$1,024.87
- Free Shipping!
|
| Gibson Diesel Performance Exhaust Systems |
| gibson Diesel swept side exhaust system |
 
|
Gibson's best performing exhaust system produces maximum torque and horsepower gains at low-end (1800 to 3000 RPMS). Gives your engine a deep aggressive tone. Exits near the stock location, behind the rear tire. The Gibson Swept Side is quieter in the cab than any other performance exhaust!
- Available in Hot-dipped Aluminized Steel
or 409-L Stainless Steel
- Large 4” Mandrel-bent tailpipe-
maintains constant exhaust flow through the bend for outstanding
performance.
- Superflow TM Muffler- Straight thru Design,
Fully welded, baffled and chambered for better volume efficiency
& unrestricted flow (Not packed or screened, nothing
to blow out).
- Giant 5-inch T-304 High Polished Stainless
Steel slash tip.
- Will not affect your factory warranty.
- Priced from: $333.87 - $709.87
- Free Shipping
|
|
| Gibson Diesel dual sport exhaust system |
|
If you're looking for that awesome street truck look and want to keep the exhaust from getting into your tow trailer or vehicle, this dual cat-back exhaust is for you. The Gibson Dual Sport is dyno tested to assure increased horsepower and produce more torque gains without adding annoying noise inside the cab. Average horsepower gains are 10-15 and 15-20lb-ft of increased torque.
- Available in Hot-dipped Aluminized Steel
or 409-L Stainless Steel
- Large 3-inch Mandrel-bent tailpipes -
maintains constant exhaust flow through the bend for outstanding
performance.
- Large 4-inch T-304 High Polished Stainless
Steel slash tips.
- Will not affect your factory warranty.
- Priced from: $470.87 - $593.87
- Free Shipping
|
|
| Gibson diesel Dual extreme exhaust system |
|
Take your truck to the extreme! If you're looking for an aggressive, powerful sound and a different look the Gibson Dual Extreme Exhaust is for you. Exits at an angle behind the rear tires. Dyno tested for improved acceleration, maximum passing & towing and increased horsepower. Will not fit with a fifth wheel trailer hitch.
- Available in Hot-dipped Aluminized Steel
or 409-L Stainless Steel
- Large 3-inch Mandrel-bent tailpipes -
maintains constant exhaust flow through the bend for outstanding
performance.
- Superflow TM Performance Muffler- Fully
welded, baffled and chambered for better volume efficiency
& unrestricted flow (Not packed or screened, nothing
to blow out).
- Large 4-inch T-304 High Polished Stainless
Steel slash tips.
- Will not affect your factory warranty.
- Priced from: $491.87 - $778.87
- Free Shipping
|
|
| Gibson Tri-Flow Diesel Exhaust System |
|
Gibson's Tri-Flow Exhaust Systems give your diesel serious power, aggressive looks, and a rich, powerful sound. The Tri-Flow is a single-swept side exit design built from monster 4" diameter, mandrel-bent aluminized or Stainless Steel pipe. The mandrel bends maintain a consistent diameter through the bends, eliminating restrictions and providing a true boost in power. The included Straight-through Suspended Flow Technology muffler eliminates annoying frequencies and leaves a strong, rich sound that's never offensive.
- Single swept-side exit
- 4" mandrel-bent Aluminized steel or 409 Stainless steel
- Easy bolt-on installation, no modifications necessary
- Does not compromise emission system or trigger sensors
- Polished stainless steel tip is 16" long with 4" inlet and 6" outlet
-
Priced from: $369.00 - $539.00
-
Free Shipping
|
|
| Magnaflow Diesel Performance Exhaust |
| Magnaflow Cat Back Exhaust System |
|
Magnaflow cat-back exhaust systems are fully complete and are made of stainless steel. Everything from the pipes, hangers, clamps, mufflers and tips. Tips, mufflers, and resonators (where applicable) are "mirror finish", polished stainless steel. The Magnaflow kits come with everything needed to bolt up in place of your factory system using basic tools.
- Dense acoustical-absorbing material filters out annoying vibrations and harsh noises leaving behind only smooth, throaty growls
- Magnaflow increases power from 3 to 23 horsepower and from 6 to 28 lbs. of torque, depending on your vehicle
- Fast-flowing mandrel-bent tubing from 2¼” to 4” diameter, depending on your vehicle, so there’s no turbulence, backpressure or restrictions of any kind
- CARB certified, legal in all 50 states
- Magnaflow Cat-Back Exhaust System are covered by a Lifetime Warranty
- Priced from $298.59 - $1,299.00
- Free Shipping
|
| MBRP Diesel Performance Exhaust |
| MBRP XP Series Exhaust System |
|
Rugged and dependable the MBRP XP Series is made of T409 stainless steel. It’s designed and built to stand up to the harshest road conditions. The lowest bend degree angles and smooth mandrel bends mean
that exhaust gases have an easier path to the tip, move faster
and reduce exhaust gas temperatures. The people at MBRP are so sure that their XP Series has what it takes that they have doubled their warranty to an unbelievable TEN years, absolutely the best warranty for a T409 system in the industry.
- T-409 Stainless Steel construction
- Stands up to the harshest road conditions
- Low bend angles and smooth mandrel bends for the fastest, smoothest flow
- Easy, bolt-on design
- Custom-designed for your year, make and model
- One system design per vehicle-no need to worry about factors like truck bed length
- Your MBRP XP Exhaust is backed by a 10-year warranty
- Priced from: $249.87-$865.87
- Free Shipping!
|
| MBRP Pro Series Exhaust System |
|
For the serious performance enthusiast who demands the best of the best. For your car or diesel truck, there is no better stainless steel than T304 and no better system than the MBRP Pro Series. With the highest chromium and nickel content of any diesel exhaust, this is simply the best system money can buy. The Pro Series comes with mirror polished, dual wall T304 stainless steel tip(s) included.
- Complete bolt-on performance exhaust system
- Custom designed for your specific year, make, and model - no need to worry about configuration or truck bed length!
- High-quality T-304 Stainless Steel construction
- Includes seamless polished T-304 straight-thru muffler
- OEM style hangers for easy, bolt-on installation
- The MBRP Pro Series is backed by a Lifetime Warranty
- Priced from: $298.87-$1,163.87
- Free Shipping!
|
| MBRP Installer Exhaust System |
|
Made of 100% Heavy Gauge Aluminized Steel the Installer Series is designed to provide the cost conscious consumer with the same high quality design and craftsmanship as our other systems, but at a value price. Installer Series is suitable for areas with moderate environmental conditions. 1 Year Warranty. Tips sold separately - see below.
- The same high-quality design and craftsmanship of our other MBRP Performance Exhaust Systems
- 100% Heavy Gauge Aluminized Steel
- Easy, bolt-on design
- One system design per vehicle-no need to worry about factors like truck bed length
- Priced from: $291.87-$862.87
- FREE SHIPPING!
|
| MBRP Filter Back Exhaust System |
|
The MBRP Filterback is a performance exhaust system designed to work with the advanced emissions control system incorporated into the new GMC/Chevy Duramax trucks. The filter back design connects to the diesel particulate filter (DPF) so there is no risk of triggering sensors or compromising the emissions system. From there, MBRP has improved exhaust flow by reducing bend degree angles and eliminating the stock muffler. MBRP tests have proven that the DPF and catalytic converter provide sufficient noise suppression without the stock muffler. These systems tune the sound to a pleasing growl.
- T-304 Stainless Construction
- Works with stock emissions control system
- T-304 mirror polished tip included
- Awesome Sound
- Lifetime Warrantee
- Priced from: $266.87-$965.87
- Free Shipping
|
| MBRP Smoker Truck Stack System - Stainless Steel |
|
Need
an exhaust system for your diesel? Want stacks? Get a complete,
ready to install system from MBRPinc. From as far forward
as we can get, right through to the T Pipes, with our SMOKERS™
Complete Deal you get every clamp, bolt and hanger you need
to complete the install.
- Priced
from $395.97
- FREE SHIPPING!
|
| Bully Dog Diesel Performance Exhaust System |
| Bully Dog Cat Back Exhaust System |
|
Bully Dog Technologies Rapid Flow Exhaust Systems are designed and built with absolute minimal degree angles on bends. This will create the most free flowing low back pressure system in the industry allowing the turbo to move air more freely, reducing exhaust temperatures. Dyno results have shown a significant gain in horsepower by simply switching from stock to a Rapid Flow Exhaust System.
The Rapid Flow Exhaust Systems have the lowest degree mandrel bends offering free flowing and low back pressure. This will lower exhaust temperatures by as much as 200 degrees and provides 10-20 hp increases dependent upon size upgrade and current horsepower output.
|
