Curt Manufacturing Front Mount Receiver Hitch 31033

3314 • Product id=331400059 indexable=262
{:score=>262, :item_path=>"_Item/_331400059", :action=>"canonical-item", :request_path=>"/Towing-Hitches/Curt-Front-Mount-Receiver-Hitch/_Item/_331400059"}
  • Our Price: $275.97
  • Shipping: FREE SHIPPING
  • Part Number: 31033
  • UPC: 612314310333
  • Rating: (305)

Curt Manufacturing 31033 fits 2011-2017 Jeep Grand Cherokee. Select your vehicle to confirm fitment.

SELECT VEHICLE

Popular Related Products

Curt Manufacturing 31033 fits the following vehicles:

  • 2011-2017 Jeep Grand Cherokee
  • 2012-2024 Dodge Durango
  • Same Day Shipping if ordered by 2pm CST*
  • Curt Front Mount Receiver Hitches can be used for a variety of towing and mounting purposes
  • Mount a cargo carrier or snow plow, push your boat into the water, or perform any number of other tasks
  • Up to 5,000 lbs GTW / 500 lbs TW
  • 2 In. Receiver
  • Curt's in-house EverGloss powder-coat finish is baked on at the optimum thickness for excellent resistance to rust and abrasions
  • Precise robotic welds for superior strength
  • All required hardware is included
  • Weather-tight sealed main body prevents rust from the inside out
  • Open back end for easy cleaning
  • Limited Lifetime Warranty

    • A Curt Front Mount Receiver Hitch instantly makes your vehicle ready for anything. Towing your vehicle, managing your cargo, and pushing your boat out into the lake is a breeze with this custom-made front hitch. It's made with the same high-quality construction and finish as Curt's rear receiver hitches, so you know it's rugged and reliable for a lifetime.

    Mount a winch, spare tire, or even a snow plow. The Curt Front Mount Trailer Hitch has a 2-inch receiver and is rated up to 5,000 lbs Gross Trailer Weight and 500 lbs. Tongue Weight for all your accessories and pulling needs. Precision robotic welds ensure superior fit and high strength, and weather-tight construction keeps moisture from getting into the hitch and prevents rusting from the inside out.

    Curt Front Mount Receiver hitches are finished with a black EverGloss powder coat. The Curt EverGloss process involves applying optimum thicknesses of powder-coat onto prepared surfaces and baking it on. The result is superior resistance to scratches, rust, and corrosion for a lifetime of reliable service. The Curt Front Hitch is custom-designed to your specific vehicle for a perfect fit and easy installation.

    Your Curt Front Hitch is built to last and comes backed by Curt's Lifetime Warranty.

    *Ships same day unless otherwise noted when you add to your cart. Applies only to in-stock items.

    Curt Front Mount Receiver Hitch Customer Reviews

    Overall:
    Performance:
    Quality:
    Appearance:

    Overall Rating:

    4.3 of 5

    Average Install Time:

    More than 2 hours
    who drives a Jeep Grand Cherokee
    Overall:
    Performance:
    Quality:
    Appearance:

    The hitch was poorly designed to fit on the 2011 Jeep Grand Cherokee Overland With Dynamic Cruise Control. The 30 minutes installation was not even close to the time actually required by a good mechanic. It required creating large holes in the frame. The hitch was too narrow by about 1/2 inch to actually reuse the front tow hooks. The hitch could have been designed to use the existing tow hitch holes much easier. The hitch needs an insert to avoid the dynamic cruise control sensor which comes out, up, and around the sensor. This is the type of design where you just want to make the engineer who designed this product install about a dozen of them, smack him on the head, and then send him back to the drawing board. The hitch did not have to be nearly as complicated to install. The final hitch sits too low on the car and drags when going up my driveway. Curt needs to call the design engineer at Chrysler and have two nuts installed in the frame during manufacture or a bigger hole cut in the frame. The dynamic cruise control sensor needs to be moved higher in the vehicle.

    Install Time: More than 2 hours