Curt Front Mount Receiver Hitch

3314

Popular Related Products

Product Details

  • Same Day Shipping if ordered by 2pm CST*
  • Curt Front Mount Receiver Hitches can be used for a variety of towing and mounting purposes
  • Mount a cargo carrier or snow plow, push your boat into the water, or perform any number of other tasks
  • Up to 5,000 lbs GTW / 500 lbs TW
  • 2 In. Receiver
  • Curt's in-house EverGloss powder-coat finish is baked on at the optimum thickness for excellent resistance to rust and abrasions
  • Precise robotic welds for superior strength
  • All required hardware is included
  • Weather-tight sealed main body prevents rust from the inside out
  • Open back end for easy cleaning
  • Limited Lifetime Warranty
  • A Curt Front Mount Receiver Hitch instantly makes your vehicle ready for anything. Towing your vehicle, managing your cargo, and pushing your boat out into the lake is a breeze with this custom-made front hitch. It's made with the same high-quality construction and finish as Curt's rear receiver hitches, so you know it's rugged and reliable for a lifetime.

    Mount a winch, spare tire, or even a snow plow. The Curt Front Mount Trailer Hitch has a 2-inch receiver and is rated up to 5,000 lbs Gross Trailer Weight and 500 lbs. Tongue Weight for all your accessories and pulling needs. Precision robotic welds ensure superior fit and high strength, and weather-tight construction keeps moisture from getting into the hitch and prevents rusting from the inside out.

    Curt Front Mount Receiver hitches are finished with a black EverGloss powder coat. The Curt EverGloss process involves applying optimum thicknesses of powder-coat onto prepared surfaces and baking it on. The result is superior resistance to scratches, rust, and corrosion for a lifetime of reliable service. The Curt Front Hitch is custom-designed to your specific vehicle for a perfect fit and easy installation.

    Your Curt Front Hitch is built to last and comes backed by Curt's Lifetime Warranty.

    *Ships same day unless otherwise noted when you add to your cart. Applies only to in-stock items.

    Curt Front Mount Receiver Hitch Customer Reviews

    Overall:
    Performance:
    Quality:
    Appearance:

    Overall Rating:

    4.7 of 5

    Average Install Time:

    30 - 60 minutes
    who drives a GMC Sierra
    Overall:
    Performance:
    Quality:
    Appearance:

    That was great but the snow plow will not go into it!

    Install Time: 1 - 2 hours

    who drives a Toyota Tacoma
    Overall:
    Performance:
    Quality:
    Appearance:

    excellent welds, fit and finish. Everything lined up perfectly. It took longer to remove the cap screws on the frame end caps than to install the new receiver hitch. I have a new frame but they re-installed the old end caps and stripped the head of one of bolts.There are three torques , one 7/16 bolt on each side could not be torqued with a socket, only enough room for and open end wrench, no problem

    Install Time: 1 - 2 hours

    who drives a Toyota Tacoma
    Overall:
    Performance:
    Quality:
    Appearance:

    It took longer to remove the end cap screws than to install the hitch. Once the screws were out, it took about an hour to install the hitch. There are three torques, two bolts cannot take a socket. Fit and finish were outstanding.

    Install Time: 30 - 60 minutes

    who drives a Chevy Colorado
    Overall:
    Performance:
    Quality:
    Appearance:

    Very easy to install

    Install Time: 1 - 2 hours

    who drives a Ford F250
    Overall:
    Performance:
    Quality:
    Appearance:

    Knowing that this install was going to take 2 deep metric sockets, an impact wrench and a 36" breaker bar (for the leaf spring nuts), would have been immensely helpful. And no, you cannot just remove the lead spring bolt nut without removing additional bumper support brackets. Also the two 3/8" self tapping screws stripped out immediately upon installation which meant enlarging the holes/screws and/or welding the tongue to the blocker beam.

    Install Time: More than 2 hours

    who drives a Chevy Silverado
    Overall:
    Performance:
    Quality:
    Appearance:

    It arrived VERY fast undamaged

    Install Time: 30 - 60 minutes

    who drives a Chevy Silverado
    Overall:
    Performance:
    Quality:
    Appearance:

    This was a perfect fit. Curt Manufactuing must have laser measured a new truck or got the OEM frame specs when they constructed this. The photo instructions were a great help, be sure to read all the print before installing, this job is not a picture read instruction guide. Thanks go out to Auto Accessories Garage for the better than A****n price and free shipping. Showed up super fast and I was able to track it all the way to my door. Two thumbs up! On my 2019 Silverado 5.3L L82 4x4 Custom, there was no Lower Air dam to trim. Nice and easy, clean fit, looks great.

    Install Time: 30 - 60 minutes

    who drives a Ford F150
    Overall:
    Performance:
    Quality:
    Appearance:

    One mounting plate was bent in about 1.5” as a result of poor packing and rough handling. As it was needed quickly and could not wait for delivery of replacement I had it straightened using a 3 ton floor jack and a 6x6 post. I read on line that these arrive bent quite often

    Install Time: 1 - 2 hours

    who drives a Dodge Ram 3500
    Overall:
    Performance:
    Quality:
    Appearance:

    Good product as described good fit for 01 ram

    Install Time: 30 - 60 minutes

    who drives a Nissan Frontier
    Overall:
    Performance:
    Quality:
    Appearance:

    Very poor quality, would not fit, had to have it bent out so all bolts would fit at my expense, avoid this product!!!

    Install Time: More than 2 hours