AutoMeter Replacement Sender

Replacement Sender for Fuel Pressure Gauge

• 60 PSI
• 1/8 In. NPT Male Thread

Replacement Sender for Full Sweep Fuel Pressure Gauge

• 30 PSI
• 1/8 In. NPT Male Thread

Replacement Nitrous & Brake Pressure Sender

• 1/8 In. NPT Male Thread

Electric Oil Pressure Gauge Sender

• 80 PSI
• For use with Short Sweep Electric Oil Pressure Gauges. 1/8 In. NPT Male Thread. Includes 1/4 In. NPT Adapter fitting.

Electric Oil Pressure Gauge Sender

• 100 PSI
• For use with Short Sweep Electric Oil Pressure Gauges. 1/8 In. NPT Male Thread. Includes 1/4 In. NPT Adapter fitting.

Narrowband Oxygen Sender Sensor Kit

• For Narrowband Air/Fuel Ratio gauges (includes sensor, weather pack harness, and weld fitting). Not compatible with Wideband Air/Fuel Gauges.

Replacement Sender for Fuel Pressure Gauge

• 15 PSI
• 1/8 In. NPT Male Thread

Replacement Sender for Full Sweep Oil & Fuel

• 100 PSI
• 1/8 In. NPT Male Thread

Replacement Boost/Vacuum 30 in.Hg. Sender

• 15 PSI

Replacement Boost/Vacuum 30 in.Hg. Sender

• 30 PSI

Sender Harness

• For Low Temp Sender Model 2250

Replacement Temperature Sender

• 1/8 In. NPT. Replacement for Full Sweep Electric Temperature gauges.

Sender for Electric Temperature Gauges

• 1/8 In. NPT.
• 240, 280 and 340 deg.
• This sender only works on pre-1995 gauges with a distinctive black mask on bottom of lens.

Sender and Fittings For Electric Temperature Gauges

• 1/8 In. NPT. Includes 3/8 In. NPT and 1/2 In. NPT adapter fittings.
• 240, 280 and 340 deg.
• This sender only works on pre-1995 gauges with a distinctive black mask on bottom of lens.

Short Sweep Electric Temp. Gauge Sender

• 1/8 In. NPT. Includes 3/8 In. NPT and 1/2 In. NPT adapter fittings. Not Compatible with Auto Gage products.
• 240, 280 and 340 deg.
• This sender only works with product built in 1995 and later. Pre-1995 short sweep electric gauges have a black mask hiding the pointer hub and require a sender #2254.

Short Sweep Electric Temperature Sender

• 1/8 In. NPT. Replacement for Short Sweep Electric Cylinder Head Temperature gauges, and for gauges using sender #2258 in shallow depth areas.
• This sender only works with 1995 and later gauges. This sending unit can also be used for short sweep electric water, oil, and trans temperature gauges where sending unit clearance is an issue.

Replacement Electric Temperature Gauge Sender

• 1/8 In. NPT
• Includes 3/8 In. NPT and 1/2 In. NPT adapter fittings.
• This sending unit is designed for use with Autogage electric temperature gauges only.

Fuel Level Sender

• For 240 Ohm Empty - 33 Ohm Full Gauges
• Adjustable to 5 In. -24 In. Deep Tanks
• Fits 5 Bolt Mounting Flange

Hall Effect Speedometer Sender

• 7/8 In. - 18THD 16 Pulse Per Rev
• Adapts most GM and Chrysler Transmissions with Speedometer Cable Output
• Includes Pass-Thru Drive for Cruise Controls

Hall Effect Speedometer Sender

• 16 Pulse Per Rev
• Adapts Ford Transmissions with Speedometer Cable Output
• Includes Pass-Thru Drive for Cruise Controls