Luverne Grip Step Running Boards
- Step up to your truck, van, or SUV with the 5052-H32 Aluminum construction of the Luverne Grip Step Running Boards
- Rugged traction provides sure footing in any weather and scrapes boots clean
- Available in your choice of wheel-to-wheel or cab length
- Textured Black powder coat finish – matching plastic end caps
- 2.5" Tall and 7" Deep - superior stepping surface
- Made in the USA
- Backed by a 1-Year Warranty
After a long hard day of work, sometimes all you can think about is climbing into your ride and putting the pedal to the metal. And when you drive a big beast of a vehicle, that climb from the dirt to the dash can feel like a trek up a mountain – especially at the end of a long day. The step into your vehicle should be as tough and strong as the vehicle itself, and it can be with Luverne Grip Step Running Boards.
Available in a variety of lengths, including wheel-to-wheel or cab-length, your Luverne Grip Step Running Boards are constructed from optimum strength 5052-H32 Aluminum. An aggressively designed traction pattern not only looks great, but also provides unbeatable grip and acts as a handy boot scraper, preventing you from tracking excess dirt and mud inside. Finished in a rust-resistant textured Black powder coat, matching plastic end-caps provide a complete and finished appearance.
Vehicle specific, Black powder coated Steel mounting brackets are included for an easy installation. Made in the USA and backed by a 1-Year Warranty.
Luverne Grip Step Running Boards Customer Reviews
Overall Rating:
4.7 of 5Average Install Time: 1-2 hours
Showing 10 of 38 reviews. See All Reviews.
2022-07-30
Only running boards out there that hook to the frame and not to the rocker panels. Perfect fit and super sturdy on our Express van.
Install Time: 2+ Hours
Installation was very simple and everything we needed was provided in the shipment. They look great on our truck and are definitely helpful in getting in and out of the truck (the stock F450 is pretty high.). I consider the final feel of of the running boards as medium duty and not heavy duty, as one of our drivers is around 300 lbs and when he steps on it there is a noticeable flex on the boards/brackets. It doesn't look like they will break or snap though.
Install Time: Under 30 minutes
2022-04-01
Very pleased with the running boards went on with simple hand tools without any modifications to the truck or boards Made in USA Working with Richard made a big difference
Install Time: 1-2 hours
2022-01-14
This is the 3rd time ordering these particular running boards. There are a few concerns/ notes to point out. 1- when you mount the brackets be sure to either have a wire brush or die to clean the threads. (Ford has overspray on the factory studs for mounting) So cleaning them will make things go quicker. 2- The bars you mount to the back of the bracket are a bit short. This is no big deal for me as we have 3/8" stainless steel all-thread that I cut to replace the ones that come with. (This particular vehicle I only had to replace 3- The running boards themselves are tough and durable. A truck we had installed on prior was in an accident, the running board saved the truck door from more extensive damage, and only received a small bend that is slightly noticeable. Also I personally threw the plastic caps out as they make a good spot for road salt and dirt to get stuck. The boards provide great traction as you either get in or out of the vehicle. Last they divide the HUGE step from the ground to the cab perfectly.
Install Time: 30-60 minutes
2021-09-17
Would order again.
Install Time: 30-60 minutes
2021-02-16
I like how rugged the mounts are, they attached where the cab is bolted to the frame, and the back mounted where the suspension arm connects. My truck is regular cab with 8 foot box and I wanted a wheel to wheel step.they hang down 3 inches below the pinch weld.
Install Time: 2+ Hours
2021-01-07
Installed these on a 2020 Ford Transit, 130" WB. I bought these because of the apparent quality of the mounting brackets. I was not disappointed. The aluminum running boards are feather light but very sturdy. The brackets and hardware are all heavy steel. The mounted boards look great and feel solid. The instructions are a bit lacking and the pictures seem to be not in sequence with the text. Some of the holes in the brackets had to be filed out a little, due to inconsistent placement of the non-threaded inserts by Ford. Also, the front, factory supplied mounting studs, were covered with undercoating and had to be cleaned.
Install Time: 2+ Hours
2020-08-30
Great running boards! According to my husband, they were not all that hard to install with a friend. They feel high quality and are worth their cost. The reason I docked a star was because it was missing some parts: 2 washers. One was present, but the incorrect size. The other just wasn’t in the package at all. It wasn’t all that big of a deal because they are easily attainable at the store, but I had to waste more time and money when it should have been present in the purchased running board package.
Install Time: 1-2 hours
2020-05-07
I am really happy with the running boards. They look nice and the quality is excellent. I did have to have the body shop put them on for me and it took them a little longer as they had to straighten the plate on my pickup and drill holes because the previously mounted running boards only had two brackets holding them.
Install Time: 2+ Hours
2020-01-13
Quick delivery. The rear step looks very nice and is heavy duty. It was very easy to install on my Sprinter van. I would recommend this to anyone.
Install Time: 30-60 minutes
Showing 10 of 38 reviews. See All Reviews.
